INSPIRA® Lace Foot

This foot is used for sewing lace and/or borders together or onto the workpiece.

• Needle: Right needle
• Stitch type: Three-thread overlock or three-thread standard rolled hem
• Stitch length: 1.5-3mm
• Differential feed lever: Normal position
• Upper knife: Normal position

Sewing:

1. Place the fabric under guide finger (A) and lace on top of guide finger (A).
2. If necessary, loosen screw (C) and slide guide plate (B) to the left or right to adjust the stitch width.
3. Tighten the screw (C).
4. Guide lace along with guide plate (B) and sew.

Note: If there is no necessity to cut the fabric edge, place both fabric and lace on top of guide finger (A). Be sure to disengage the upper knife.